A tomato grower in Pakistan was sourcing lifting and pallet-handling equipment for a privately operated greenhouse. The customer described a flat concrete floor and a greenhouse with a gutter height of approximately 4 m and a ridge height of 5.5 m. Equipment selection therefore involved more than choosing a lift height: machine dimensions, local charging requirements and pallet truck options also needed attention.
Customer-supplied greenhouse view used during equipment selection.
During the initial discussion, the buyer compared compact lifting equipment at different heights and revised the proposed quantities to suit the budget. DFLIFT supplied dimensions and quotations for the alternatives. The purchase configuration was then narrowed to one AMWP-4 self-propelled vertical mast lift and one CTX-20Q electric pallet truck.
| Equipment | Project configuration |
|---|---|
| AMWP-4 vertical mast lift | 1 unit; 227 kg rated capacity; 4 m platform height |
| Lift platform dimensions | 1,280 × 700 mm |
| Lift overall dimensions | 1,360 × 760 × 1,980 mm |
| CTX-20Q electric pallet truck | 1 unit; 2,000 kg rated capacity |
Listing platform height, platform dimensions and overall dimensions separately gave the customer specific figures to compare with the greenhouse space. The 4 m figure refers to platform height.
The customer confirmed a 220 V, 50 Hz charging supply and requested a British three-pin plug. DFLIFT used plug illustrations to check the connection type with the buyer before shipment preparation.
The pallet truck discussion also covered the relationship between wheel type and fork width. The buyer initially preferred narrower forks. After comparing a 550 mm polyurethane-wheel configuration with a 685 mm rubber-wheel configuration, the customer accepted the 685 mm rubber-wheel option. This exchange turned a general pallet truck enquiry into a specific choice of wheel arrangement and fork width.
As the equipment was being prepared, DFLIFT shared factory photos of the vertical mast lift so the customer could view the machine remotely. The lift and electric pallet truck were subsequently shipped by sea from Qingdao to Pakistan.
Factory photo shared during preparation of the vertical mast lift.
This project brought together greenhouse dimensions, lift configuration, charging requirements and pallet-handling options. For a similar enquiry, sharing the site height, floor conditions and access dimensions helps turn the initial requirement into an equipment specification.
Ang pangalan ko ay Ray Shen at mayroon akong 2 taong karanasan sa pamamahala ng internasyonal na logistik at 8 taon ng karanasan sa negosyo sa internasyonal na kalakalan. Nakatuon ako sa pagbibigay ng mahusay na serbisyo sa customer at pagbibigay sa aking mga customer ng mga de-kalidad na produkto sa pinakamagandang presyo. Kung mayroon kang anumang mga pangangailangan at katanungan tungkol sa aming mga produkto, mangyaring huwag mag-atubiling makipag-ugnay sa akin, ako ay lubos na pinarangalan na tulungan kang malutas ang problema at maging iyong taos-pusong kasosyo!
Kunin Direktang Listahan ng Presyo ng Produkto sa Iyong Inbox.
