A tomato grower in Pakistan was sourcing lifting and pallet-handling equipment for a privately operated greenhouse. The customer described a flat concrete floor and a greenhouse with a gutter height of approximately 4 m and a ridge height of 5.5 m. Equipment selection therefore involved more than choosing a lift height: machine dimensions, local charging requirements and pallet truck options also needed attention.
Customer-supplied greenhouse view used during equipment selection.
During the initial discussion, the buyer compared compact lifting equipment at different heights and revised the proposed quantities to suit the budget. DFLIFT supplied dimensions and quotations for the alternatives. The purchase configuration was then narrowed to one AMWP-4 self-propelled vertical mast lift and one CTX-20Q electric pallet truck.
| Equipment | Project configuration |
|---|---|
| AMWP-4 vertical mast lift | 1 unit; 227 kg rated capacity; 4 m platform height |
| Lift platform dimensions | 1,280 × 700 mm |
| Lift overall dimensions | 1,360 × 760 × 1,980 mm |
| CTX-20Q electric pallet truck | 1 unit; 2,000 kg rated capacity |
Listing platform height, platform dimensions and overall dimensions separately gave the customer specific figures to compare with the greenhouse space. The 4 m figure refers to platform height.
The customer confirmed a 220 V, 50 Hz charging supply and requested a British three-pin plug. DFLIFT used plug illustrations to check the connection type with the buyer before shipment preparation.
The pallet truck discussion also covered the relationship between wheel type and fork width. The buyer initially preferred narrower forks. After comparing a 550 mm polyurethane-wheel configuration with a 685 mm rubber-wheel configuration, the customer accepted the 685 mm rubber-wheel option. This exchange turned a general pallet truck enquiry into a specific choice of wheel arrangement and fork width.
As the equipment was being prepared, DFLIFT shared factory photos of the vertical mast lift so the customer could view the machine remotely. The lift and electric pallet truck were subsequently shipped by sea from Qingdao to Pakistan.
Factory photo shared during preparation of the vertical mast lift.
This project brought together greenhouse dimensions, lift configuration, charging requirements and pallet-handling options. For a similar enquiry, sharing the site height, floor conditions and access dimensions helps turn the initial requirement into an equipment specification.
제 이름은 Ray Shen이고 국제 물류 관리 경력 2년, 국제 무역 비즈니스 경력 8년입니다. 나는 우수한 고객 서비스를 제공하고 고객에게 최고의 가격으로 고품질 제품을 제공하기 위해 최선을 다하고 있습니다. 당사 제품에 대한 요구사항이나 질문이 있는 경우 언제든지 저에게 연락해 주십시오. 귀하가 문제를 해결하는 데 도움을 주고 귀하의 진심 어린 파트너가 되어 영광입니다!
받은 편지함으로 직접 제품 가격 목록을 가져옵니다.
