Nacelle élévatrice à mât automotrice

INTRODUCTION

Compact body + zero turning radius for agile movement in tight spaces; non-marking tires prevent floor damage. Battery-powered, low-noise, over 8h runtime. High-strength mast stably bears 215kg. Multiple safety features + dual-control operation, suitable for multi-industry aerial work, easy to maintain.

AVANTAGE

• Système de descente d'urgence : Équipé d'une vanne de descente d'urgence manuelle ou à batterie. En cas de panne de courant ou de défaillance du système hydraulique, les opérateurs peuvent actionner un cordon ou un bouton-poussoir pour une descente en douceur et contrôlée. Ceci évite que des personnes ou du matériel ne se retrouvent bloqués en hauteur, améliorant considérablement la sécurité en cas d'urgence.
• Système de protection contre l'éclatement des flexibles hydrauliques : les flexibles hydrauliques sont équipés de soupapes de sécurité intégrées. En cas de rupture inattendue d'un flexible entraînant une chute de pression brutale, la soupape se verrouille automatiquement pour empêcher la chute libre de la plateforme. Ceci garantit le maintien du contrôle du mécanisme de levage et de la flèche dans toutes les conditions d'utilisation.
• Système de freinage automatique : Le système de freinage s’active automatiquement en fonction de la vitesse des roues et de l’inclinaison, que ce soit en mouvement ou à l’arrêt. Sur les pentes, les terrains accidentés ou lors des déplacements de type chariot élévateur, il empêche efficacement tout emballement, garantissant ainsi la stabilité générale de la machine lors des opérations de déplacement, de chargement et de travaux en hauteur.
• Système de diagnostic des pannes : Le panneau de commande intègre un module de diagnostic intelligent qui surveille en permanence le système hydraulique, l’état de la batterie, les capteurs et le fonctionnement de la flèche. En cas d’anomalie, il affiche des codes d’erreur spécifiques ou des voyants lumineux, facilitant ainsi un dépannage rapide et minimisant les temps d’arrêt de l’équipement.

Configuration

• AC Drive Motor: Uses an AC motor-driven wheel system for smooth start-stop performance, low energy consumption, and brush-free maintenance, making it ideal for indoor and outdoor aerial work environments with frequent start-stop operations.
• Proportional Control: Joystick supports proportional speed regulation—the farther the throw, the faster the action. Enables precise inching control for lifting, traveling, and steering, enhancing operational comfort in confined spaces.
• Platform Self-Locking Gate: Equipped with a mechanical self-locking gate at the platform entrance. The machine is prohibited from lifting or driving if the gate is not fully secured, preventing accidental falls and ensuring high-altitude safety.
• Full-Height Drive Capability: Allows normal travel at any platform height (not limited to stowed position). Enables slight positional adjustments during aerial work without repeated lifting/lowering, significantly boosting efficiency.
• Non-Marking Tires: Features polyurethane or composite rubber non-marking tires that protect sensitive flooring such as epoxy, tile, and wood. Ideal for indoor warehouses, shopping malls, and clean workshops.
• Automatic Braking System: Brakes engage automatically when travel stops to prevent rolling on inclines or uneven ground. Brakes release automatically upon travel, simplifying operation and enhancing slope safety.
• Tilt Alarm: The system triggers audible and visual alarms when the chassis tilt angle exceeds the preset safety limit. Lifting functions are restricted to prevent overturning risks on uneven terrain.
• Motion Audible Alarm: An automatic buzzer sounds during lifting, traveling, and steering operations to alert surrounding personnel to maintain a safe distance.
• 345° Turret Rotation: The turret supports 345° of continuous rotation (near-full circle), covering most work orientations without frequent chassis repositioning, facilitating precise alignment in narrow areas.
• Horn: An electric horn is integrated into the control panel for signaling and warnings, suitable for noisy environments or obstructed sightlines.
• Hour Meter: A built-in hour meter records cumulative operating time, assisting in scheduled maintenance planning (e.g., hydraulic oil changes, battery checks, lubrication) to extend equipment lifespan.
• Charger Protection System: The charging circuit integrates over-current, over-voltage, over-temperature, and reverse polarity protection to prevent battery damage. Supports automatic shut-off when fully charged.
• Strobe Warning Light: High-brightness strobe lights mounted on top flash continuously during operation to enhance visibility in low-light or complex environments and alert nearby personnel.
• Automatic Pothole Protection: Retractable pothole protection plates deploy automatically beneath the chassis when the platform rises, filling gaps between wheels and ground to prevent falling into holes or crossing over edges.
• Charging Indicator Light: Indicator lights display real-time battery status during charging (e.g., red for charging, green for full, flashing for fault), allowing quick assessment of battery condition.
• Manual Brake Release: In case of power failure or malfunction, the manual brake release mechanism allows operators to disengage the brake for towing, relocation, or emergency movement to avoid immobilization.
• Safety Harness Lanyard Points: Reserved anchor points for safety harnesses are provided inside the platform. Operators can attach full-body harnesses, complying with high-altitude safety regulations to prevent falls.
• Fixed Anchor Points & Lifting Lugs: Dedicated anchor points and lifting lugs are reserved on the body for secure tie-down during transport, as well as crane or forklift-assisted loading/unloading and cross-site relocation.
• Emergency Stop Button: Red emergency stop buttons are equipped on both the control panel and remote control. Pressing immediately cuts all power output for emergency braking in critical situations.
• Swing-Open Protective Covers: Swing-open protective covers are installed over key components (e.g., controllers, batteries, hydraulic valve blocks). They can be opened tool-free for quick daily inspection and maintenance.

SPÉCIFICATION

Détails des pièces

Central control system

Machine control panel

Poignée de commande de la plateforme

Pneu

Voyant d'avertissement

Work platform